Whirlpool Washer F0E7 Code (2024)

FAQs

Whirlpool Washer F0E7 Code? ›

F0E7 - Clothes detected

F07 — Electronic circuit board fault / heating circuit fault. Issue: During a wash cycle the programme pauses part way through/ the machine is not heating and the pump runs continuously.

Please remove the clothing/load from the washer and re-start Clean Washer cycle. If the problem persists, call for service.

Whirlpool error F7

Make sure the drum isn't too full. Also make sure all transit bolts are removed. These prevent damage during transport, but are no longer necessary once the washing machine is installed in your house.

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.

F07: Motor control TRIAC error. This means that there is a problem with the motor control circuitry. This is a more serious error and may require professional repair. F13: Door lock error.

F5 is a water temperature error, the sensor is not giving the correct readings to the board, so check its connections and replace the water sensor if necessary. F07 is a motor driver error, check the motor itself, its connections, and if the problem persists suspect the control board.

An E07 error code is either a problem with the door lock or with the motor being jammed and unable to spin. An E08 error code indicates a problem with the motor speed sensor.

This code indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection.

E7: This error code indicates that there is a temperature sensor fault. Contact a technician for help.

What does f0 E7 mean on Whirlpool washer? ›

Error code FOE7 on a Whirlpool washer typically indicates that there is a problem with the door lock. This could be caused by a problem with the lock itself, such as a broken part, or by a problem with the control board that is preventing the lock from functioning properly.

Common problems include Whirlpool washers not starting, making loud noises, displaying error codes, and more. The average life expectancy of a Whirlpool washer is 10 to 15 years depending on type and upkeep, and like other washers that may last as long, you'll need to assess whether it's worth fixing.

A Whirlpool Cabrio F error code is usually caused by a home network voltage drop, voltage spike or a short circuit. Typically, when you have an F error code, the washer won't work until the error code has been resolved.