0.8 mm double-sided foam tape for LSE surfaces: plastic to plastic application in automotive interior
Product description
tesa® 92108 HiP is a deep black double-sided foam tape for mounting interior plastic parts. This single-layer designed product provides high performance on LSE plastics right after application without any surface pre-treatment. Its high-performance LSE adhesive creates an outstanding and secure bond to typical automotive attachment parts made of LSE (like PP and PP/EPDM) and MSE (like ABS, PA, or PC). tesa® 92108 HiP shows low VOC properties to meet automotive interior requirements and assures a reliable bond in the temperature range from -30°C to 100°C, typical for interior applications.
tesa® 92108 HiP optimally absorbs and compensates dynamic and static stress. Its pull force resistance and shear force resistance even on demanding LSE surfaces is outstanding and provides a secure bond in changing temperature conditions.
tesa® 92108 HiP is suitable for sealing requirements in terms of air and humidity permeability.
tesa® 92108 HiP is also available in 0.5 mm and 1.1 mm thicknesses.
Main features:
- High initial bonding performance on LSE plastics (e.g.: PP) without any pre-treatment
- Superior bonding performance right after application
- Low VOC (acc. GB 27630) – no critical substances detectable
- Deep black color for enhanced appearance and design flexibility
- High humidity and age resistance
- Very good sealing properties
- Efficient and robust application
LSE: Low surface energy
MSE: Medium surface energy
Product details and specifications
Application Fields
tesa® 92108 HiP is suitable for a wide range of plastic to plastic applications. To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Example applications are:
- Mounting of plastics in interior systems (e.g.: inner doors, co*ckpits, steering wheels, consoles and decorative trims, etc.)
- Mounting of plastic attachment parts in interior and exterior (e.g.: sensors, cameras, emblems and lightweight attachments, etc.)
- Mounting of plastics in automotive electronics modules (e.g.: display in comfort and infotainment systems, ambient lighting, etc.)
Product Construction
| Backing material | none |
| Color | black |
| Color of liner | transparent |
| Thickness of tape | 31.5 mils 800 µm |
| Total thickness | 31.5 mils 800 µm |
| Type of adhesive | type: performance polymer foam |
| Type of liner | type: PET |
Product Construction
| Backing material | none |
| Color | black |
| Color of liner | transparent |
| Thickness of tape | 31.5 mils 800 µm |
| Total thickness | 31.5 mils 800 µm |
| Type of adhesive | type: performance polymer foam |
| Type of liner | type: PET |
Properties / Performance Values
| Suitable for die cutting | yes |
| Static shear resistance | very good |
| Ageing resistance (UV) | good |
| Low VOC | very good |
Properties / Performance Values
| Suitable for die cutting | yes |
| Static shear resistance | very good |
| Ageing resistance (UV) | good |
| Low VOC | very good |
Adhesion to Values
| Adhesion to ABS (initial) | 14.28 lbs/in 25 N/cm |
| Adhesion to ABS (after 3 days) | 17.13 lbs/in 30 N/cm |
| Adhesion to PP (initial) | 15.99 lbs/in 28 N/cm |
| Adhesion to PP (after 3 days) | 20.56 lbs/in 36 N/cm |
| Adhesion to Steel (initial) | 18.27 lbs/in 32 N/cm |
| Adhesion to Steel (after 3 days) | 19.99 lbs/in 35 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 14.28 lbs/in 25 N/cm |
| Adhesion to ABS (after 3 days) | 17.13 lbs/in 30 N/cm |
| Adhesion to PP (initial) | 15.99 lbs/in 28 N/cm |
| Adhesion to PP (after 3 days) | 20.56 lbs/in 36 N/cm |
| Adhesion to Steel (initial) | 18.27 lbs/in 32 N/cm |
| Adhesion to Steel (after 3 days) | 19.99 lbs/in 35 N/cm |
Additional Info
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Safety data sheet_tesa® 92108_en-US_v4131.7 kBProduct information_tesa® 92108_en-US60.6 kB
Contact us
Thank you for your message
We'll get back to you as soon as possible.
Best regards
Your tesa Team
Something went wrong. Please try again later.
Product comparison
| Name of product |
|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| Backing material | none | foamed acrylic | Acrylic foam | foamed acrylic | PE foam | PE foam | PE foam | PE foam | PE foam | foamed acrylic | foamed acrylic |
| Type of adhesive | performance polymer foam | modified acrylic | none | none | LSE | acrylic | acrylic | LSE | specialty | pure acrylic | modified acrylic |
| Total thickness | 800 µm | 500 µm | 2000 µm | 1600 µm | 0.8 µm | 0.6 µm | 0.6 µm | 0.5 µm | 1.2 µm | 1000 µm | 800 µm |
| Elongation at break | 1400 % | 390 % | 320 % | 320 % | 270 % | 400 % | 1400 % |
